Cockpit Control Confusion
Inadvertent use of the wrong cockpit control instead of the intended control is a potential situation that pilots may encounter on any aircraft type. This kind of error can occur with even the most experienced pilots and this article explores what factors can influence and lead to this type of occurrence. The resilience of the aircraft systems to cope with such an error provides effective safety barriers to prevent serious events. The aim of this article is also to raise awareness of the potential causes and effects of cockpit control confusion incidents and provide information about best practices, which can help pilots to reduce the risks that may lead to operational and safety consequences.
The Adverse Effects of Unrealistic Simulator Scenarios
The use of unrealistic failure scenarios during simulator training can lead to negative training. This article describes the « TOTAL PITOT BLOCKED » failure that is available in simulators. It explains why simultaneous and permanent dual “TOTAL PITOT BLOCKED” in climb or descent phase leads to negative training.
Preparing Flight Crews to Face Unexpected Events
During an approach at night-time into Glasgow Airport, the crew of an easyJet A319 experienced a strong cross-wind and turbulent conditions, which created a WINDSHEAR alert and led them to perform a go-around.As they did this, PFD information including Flight Modes Annunciator, Flight Director bars, and characteristic speeds all disappeared from both PFDs. In addition, the rudder travel limiter function became unavailable, and the auto-thrust disconnected. The crew was facing a very challenging situation, and needed to use their training in back-to-basics flying and efficient Crew Resource Management.
Learning from the evidence
In September 2014, Airbus will inaugurate its new A350 pilots Type-Rating course. The drivers for this development were both the EBT (Evidence-Based Training) principles and an analysis of natural learning mechanisms.
Hard Landing, a Case Study for Crews and Maintenance Personnel
In this article, Airbus would like to take you through a case study and use it to learn some lessons and share our safety first culture. The article is split into three distinct parts:The first will describe the eventThe second, targeted at flight crews, will discuss and develop the stabilization criteria and present a prevention strategy against unstable approaches. It will also insist on the need to use the appropriate level of automation at all times.The third part, targeted at maintenance personnel, will illustrate the need to always use the Aircraft Maintenance Manual (AMM) as the source document for maintenance operations.