Takeoff Surveillance & Monitoring Functions
Airbus has continuously improved takeoff safety since the “TO CONFIG TEST” pushbutton was first introduced on A300 and A310 aircraft, and with the development of the Takeoff Surveillance (TOS1 & TOS2) and Takeoff Monitoring (TOM) functions.The TOS2 package that was initially developed for the A350 is now available for A320 family and A330 aircraft. This is an opportunity to review the checks that are performed by each function, from cockpit preparation to takeoff.
Using Aircraft as a Sensor on Contaminated Runways
In any analysis of aviation accidents, Runway Excursions (RE) are usually identified as the top cause of aircraft hull losses. Many of these accidents occur on runways where braking performance is degraded by runway surface contaminants.Airbus and its subsidiary NAVBLUE have developed a new technology to use the aircraft itself as a sensor to measure the available runway braking action, and subsequently share that data to the benefit of oncoming traffic.
Landing on contaminated runways
Landing performance is a function of the exact landing runway conditions at the time of landing. A simple statement for a more complex reality. Indeed, knowing what exact contamination is or remains on the runway at a given point in time is often challenging.
Understanding Weight and Balance
To “feel” the aircraft response through the flight controls as being “heavier or lighter” than anticipated at take-off can result from a weight & balance inaccuracy. In fact, when the CG is out of the operational limits, the safety consequences can be far more critical than just a strange feeling.
Control your speed… at take-off
One of the most critical decisions that every line pilot may potentially encounter during every take-off is to continue or abort the procedure; hence the essential need to properly monitor the airspeed during this phase.